On the live cluster the case clone ran at boot: the golden boot had no egress
policy, and the real actor was still being restored, so both TLS handshakes to
GitHub were cut. After the start the actor is RUNNING under its policy (the
delivery the same minute went through). Adds the one-case check Run (a subset
of validation-46) and re-pins the task manifests to the current runner digest.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01EmM1j46qgKMh3zqD1QMwEo
Agent Substrate's egress gateway denies an actor without an EgressPolicy, so
no task could deliver its artifacts or reach a model. egress.py grants each
task exactly: http/80 to ousast-receiver.ax-system.svc.cluster.local, and
TLS passthrough/443 to the bound Workspaces' https Git hosts and the bound
Model's openultrasast.io/egress-hosts (api.deepseek.com for deepseek-flash).
No IPs, no wildcards, no https (MITM) rules.
The reconciler writes the policy with kubectl-ate between ax apply and
resume, reads it back, waits OUSAST_EGRESS_SETTLE (11 s, the gateway's
cached deny), and after ax delete task confirms the policy went with its
actor (kubectl-ate has no delete verb; the store cascades).
The receiver is a selector-less Service (ops/ax/receiver-service.yaml.tmpl,
applied by up.sh together with the no-build agentgateway egress gateway)
on port 18090 of the host. Measured live: the gateway checks the policy on
Host but connects to the address the actor dialled, so the runner dials the
Service's ClusterIP (OUSAST_ARTIFACT_DIAL) with the receiver's name as Host.
The runner now labels its delivery with the Run's task name (OUSAST_TASK),
which is what the receiver accepts; the ax Task name was refused with 403.
The Receiver moved to egress.py to keep reconciler.py at 460 lines.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01EmM1j46qgKMh3zqD1QMwEo
agree matched declared sites through benchmarks/independent/evaluate.py,
which the runner image does not carry, so site matching would have been
"not assessed". The generator now resolves the fix's old-side ranges
(evaluate.hunks, line for line) into case.json, with the declared sites in
the set and the reference's cost, and agree.matches_declared reproduces
matches_v2; a parity test runs both over the recorded outputs of the 15
validation cases (200 probes, identical verdicts) and agree on those outputs
returns the reference's 16 of 20 and $0.022.
agree reports cost_per_candidate (plane spend) and
cost_per_candidate_with_recorded_triage; Requirement 6.2 is judged on the
latter (design.md). --runner-image re-pins the templates from ops/ax/up.sh's
pin file; the committed manifests are regenerated at the current digest.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01EmM1j46qgKMh3zqD1QMwEo
The first live run on the local ax cluster and ax's source (docs/runner.md,
docs/sandbox.md, internal/controller/reconciler.go, internal/server/server.go)
showed a lifecycle the task-3/4 code did not model:
- `ax apply` creates a Task Suspended (Ready=False, TaskSuspended); it runs only
after `ax resume task`. The first resume of a new image can fail with
DeadlineExceeded while Agent Substrate builds the golden snapshot, and ax's
server then stores phase Failed; a later resume succeeds.
- ax has no Completed phase and never reads a command's exit back.
- The runner is PID 1 and must keep serving after the command exits; stop and
suspend deliver SIGTERM, to be forwarded to the command's process group.
Our runner imported the task in-process and exited, which stopped the
container ("Container guest is stopped") and made every resume time out.
- ax's controller probes /readyz?check=workspace; the query string made our
handler answer 404.
Runner (Req 4.1-4.4): spec.command runs as a child
`python -m openultrasast.plane.tasks.<name>` in its own process group, cwd the
first workspace, AX_METADATA_URL set; ax's metadata paths are served. After the
child exits the runner reads summary.json (a crash without one becomes failed
with the exit code and stderr tail), delivers the output directory, writes
/workspace/.ousast-state/<task>.done.json and serves until SIGTERM (forwarded
to the group, SIGKILL after OUSAST_TERM_GRACE, exit 0). A boot with the marker
never reruns the command; a failed delivery is retried alone. Workspaces are
prepared on the first boot only. AX_RUNNER_EXIT_AFTER_COMMAND=1 is the
unit-test escape.
Reconciler (Req 2.2, 2.3, 3.1-3.3): `ax resume task` after apply, retrying
DeadlineExceeded/Unavailable with backoff up to OUSAST_RESUME_TIMEOUT (900 s);
completion is the artifact delivery; Failed after a resume went through, a
vanished task, or no delivery within OUSAST_TASK_TIMEOUT (7200 s) fail the
task with ax's condition message; `ax delete task` follows. Ax gains resume()
and phase() returns the condition message. doctor moves to plane/doctor.py
(tasks.md task 0 allows the sibling) to keep reconciler.py under 500 lines.
Tests: the fake ax follows the real lifecycle (Suspended, a failing first
resume that leaves Failed, Running forever, delivery only after a resume went
through), plus Failed-with-message, vanish, resume-timeout and task-timeout
scenarios; runner tests cover the child's cwd/group/metadata URL, stay-up and
SIGTERM in a real subprocess, SIGKILL of a SIGTERM-ignoring group, and the
marker. The opt-in live test now checks resume, Running, suspend and a second
resume instead of a Completed phase. design.md and tasks.md state the
lifecycle; the module audit manifest counts plane.doctor.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01EmM1j46qgKMh3zqD1QMwEo
Model deepseek-flash (declared provider extension, endpoint prices in
parameters, secretKey naming the DEEPSEEK_API_KEY secret), digest-pinned
Task templates repo-facts / verify / agree, and a generator
(plane/generate.py, `ousast plane workspaces --validation-set ...`) that
emits per case the vulnerable-pin Workspace, a files-only inputs Workspace
(recorded candidates after the recorded triage, declared sites, triage),
per-case Tasks and one Run validation-46: facts -> verify a, verify b ->
agree for the 15 cases, 46 candidates (43 kept), budgets 1.5x the recorded
per-pass share. A Run entry cannot add a binding or env, and Run.inputs
names only task artifacts, so the case is fixed by per-case Tasks.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01EmM1j46qgKMh3zqD1QMwEo
ai-service-plane task 3, Requirements 4.1-4.4 (with 2.2 and 2.3 honoured by the
exit-code contract):
- src/openultrasast/plane/runner.py: the ax-task-runner entrypoint. Reads the Task
from AX_TASK_YAML and the bound Workspaces from AX_WORKSPACES_YAML (task-1 loaders),
serves /healthz and /readyz on port 80 (AX_RUNNER_PORT; 0 picks a free port,
AX_RUNNER_HTTP=0 disables it for unit tests), materialises each workspace at its
bound path (spec.files verbatim; spec.git at <path>/<name>, exported from the
OUSAST_CASE_CACHE checkout whose origin matches, else a shallow clone at the pin;
a repo already present on a resumed volume is kept) and only then answers 200 on
/readyz. Runs spec.command by importing openultrasast.plane.tasks.<name> with the
remaining elements as argv; sets OUSAST_WORKSPACE_DIR from the first binding when
the Task's env leaves it unset. A crash writes summary.json with status failed and
the traceback. When OUSAST_ARTIFACT_URL is set, the whole OUSAST_OUTPUT_DIR is
POSTed as an uncompressed tar (Content-Type application/x-tar, X-Ousast-Task,
X-Ousast-Run) with three attempts and backoff; a failed delivery rewrites
summary.json to failed and exits 2. Exit codes: done 0, failed 2, unfinished 3.
- plane/Dockerfile.runner: python:3.12-slim + git, `pip install .` (no extras), a
shell wrapper at /usr/local/bin/ax-task-runner exec'ing the module; built and
loaded into kind by ops/ax/up.sh, not by the tests.
- tests/test_plane_runner.py (+ tests/plane_stub_task.py registered as the task
module): env contract on a files workspace, readyz 503 then 200, delivery to a
local receiver with the headers and tar checked, delivery failure -> failed and
exit 2 after three attempts, crash -> failed with traceback, exit codes per
status, case-cache export at the pin, shallow-clone fallback, resume keeps the
checkout.
- model/audit.py: SPEC_OWNED row for plane.runner; module-audit measurement
regenerated (122 modules, no orphans, note kept).
Co-Authored-By: Claude Fable 5.1 <[email protected]>
Claude-Session: https://claude.ai/code/session_01EmM1j46qgKMh3zqD1QMwEo
